EN FR
Products
Capacitors
Capacitors
Aluminum Electrolytic Capacitors Ceramic Capacitors Film & Mica Capacitors Tantalum Capacitors
See All
Custom
Designs
Magnetics
Magnetics
Transformers Inductors Magnetic Winding
See All
Custom
Designs
Ohmcraft Resistors
Ohmcraft Resistors
Surface Mount Resistors Leaded resistors Custom resistors
See All
Custom
Designs
Position Sensors
Position Sensors
Precision Potentiometers Optical Rotary Encoders
See All
Custom
Designs
Slip Rings & Rotary Joints
Slip Rings & Rotary Joints
Slip Rings Integrated Solutions
See All
Custom
Designs
Filters
Filters
EMI-RFI filters EMC - TEMPEST - HEMP
See All
Custom
Designs
Materials & Tuning Components
Materials & Tuning Components
Ferrite Materials Dielectric Resonators Microwave Tuning Elements Coaxial Resonators
See All
Custom
Designs
Micropen
Micropen
Applications
Aviation
Defense
Space
Medical
Rail
Industry
Energy
Aviation
Commercial Aircraft
eVTOL
Defense
Military Aircraft
Land equipment
Naval
Space
Satellites & Constellations
Launchers
Exploration
Medical
Medical Imaging
Medical disposables
Implantable device
External defibrillator
Rail
Rolling stock
Signalling
Industry
Test & Measurement
Industrial Electronics
Telecom Antennas
Industrial robots
Energy
Renewable energy
Oil & Gas
About
Group
Quality & Environment

Working at Exxelia
Events
News
1

High Temperature

Download Catalog
Filtre

High Temperature

High temperature capacitors are made of class 1 or class 2 ceramic dielectrics featuring special compositions based on high purity oxides. Exxelia high temperature capacitors are qualified up to 250°C, and are available in chips and stackes versions.

Frequently Asked Questions

productCategory.section3.subTitle
High Temperature Ceramic Capacitors

High temperature ceramic capacitors and high temperature mica capacitors are often used in situations that require a higher voltage or a higher power than normal. Because of the ways in which they are built, they can offer low ESR and excellent inrush current and ripple capabilities that other types of capacitors cannot. The only downside is that they tend to be physically larger than other types of capacitors.

The automotive industry is another area where high temperature capacitors are required. The temperature conditions can vary dramatically depending on what area of a car you’re talking about. The brake systems, the engine and the transmission are often the most temperature intensive areas.

What is Ceramic Capacitors

Excellent temperature resistance, high volume/capacitance ratio, electrical properties and reliability make Exxelia's ceramic capacitors ideal for a wide range of fields of application including medical implants, aircraft flight controls, switched-mode power supply in harsh environments, core samplers for petroleum exploration, and space vehicles. Exxelia also offers Hyper Frequency ceramic capacitors with optimized size and very low ESR. 

These HiQ capacitors offer excellent performance levels for RF applications requiring functional reliability. Typically these applications include civil and military telecommunications (cellular base station equipment, wireless broadband service, Point to-Point or Multipoint radios, radio broadcasting equipment), and MRI coils.

Multilayer Ceramic Capacitors MLCC

Our multilayer ceramic capacitor (MLCC) is a chip capacitor manufactured with layers of ceramic material and metal. The alternating layers can be built up to the desired capacitance range. The dielectric thickness determines the voltage rating. The capacitance is determined by multiplying the number of layers by the amount of active area and then the dielectric constant for the material. This number is then divided by the dielectric thickness. The active area is the overlap between the electrodes.

A capacitor with a thicker dielectric layer handles higher voltages than one with a thinner layer. Inversely, the thinner dielectric will have a higher capacitance rating. The MLCC design provides a significant space-saving advantage over other capacitor styles.

How is Ceramic used in Capacitors ?

Ceramic chips are created with binders and solvents added to a specified ceramic powder. The slurry created is dried, forming a sheet or tape of ceramic material. Metal powder is mixed with solvents and additional ceramic material to create a liquid electrode. The liquid is then printed onto the ceramic layer. Layers of the ceramic sheets are stacked and laminated to form a solid structure.

The solid structure is cut into the desired size. Once cutting is complete, the assembly must be kiln fired. The temperature used in the firing process is critical in determining the capacitor’s characteristics. The process is similar for disc and chip styles. Disc capacitors use long leads to mount through circuit boards. Chips use surface mount technology.

Do I need Class 1 or Class 2 Ceramic Capacitor?

A Class 1 ceramic capacitor is the best choice for applications that demand low losses and high stability. This style provides a reliable capacitance within the designated range of frequency, temperature and voltage. Class 2 series offer higher capacitance, but have wider fluctuations. The thermal stability varies by +/- 15 percent; these should be used in applications that do not require a continual exact capacitance. Exxelia uses NPO and P100 as Class 1 dielectrics ; and BX, 2C1 and X7R as Class 2 dielectrics.

Class 1 feedthrough capacitors offer high frequency noise reduction, and are excellent for use in microwave transmission, medical applications and DC supply and signal lines. Feedthrough design uses an axial-style lead for connections.

Still have questions ?

Can’t find the answer you’re looking for ? Please contact with our customer service
Contact